TOP｜CONSULTING｜Carbonization equipment, environmental equipment｜carbonization equipment systems

Carbonization equipment, environmental equipment, carbonization equipment systems

Series		Aim	Chief objects	High water content material	System	Heating

OC		Wood-based stock Low water content organic material	Wood chips Pruned branches Driftwood Scrap, etc.	×	Batch	Indirect
Features and conditions	Carbonization equipment for wood, bamboo and other wood-based materials. Uses dedicated cage for truck system, achieving easy controllability.
RCC		High water content organic material Wood-based stock	Foodstuff sludge Sewage Coffee grounds Tofu refuse, kitchen garbage Wood chips, etc.	○	Continuous	Indirect
Features and conditions	Optimal for high water content organic material carbonization. Also conducts continuous carbonization of lumber, and can be designed to match treatment capacity. Pre-processing required to reduce the material to the size that can be input to the screw conveyer.
WBC		Wood-based stock	Wood chips Pruned branches Driftwood Scrap, etc.	×	Batch	Hot blast
Features and conditions	Carbonizer for wood-based materials such as wood and bamboo. Large types must be fitted with forced cooling system.
SFC		Wood-based stock	Wood chips (pin chip) RDF, etc.	×	Continuous	Hot blast
Features and conditions	Dedicated carbonizer for wood, bamboo, RDF, etc. Can be designed to match treatment capacity per unit time. Uses fossil fuel for heat source on startup, but can run almost entirely on air as carbonization begins.
Mobile		Multi-purpose	Thinned wood Pruned branches Driftwood, cattle skulls	×	Batch	Indirect
Features and conditions	Allows carbonization at site, with vehicle loadable equipment for multi-purpose use. Equipped with oil tank and generator, permitting use in the deep mountains or at event venues.
Charcoal furnace		Wood-based stock	Bamboo, wood, etc. (for bamboo carbon production)	×	Batch	Baking
Features and conditions	Low-cost type charcoal kiln; old charcoal kiln finished with iron and adiabatic material. Ease of mobility is ideal for trial charcoal making.
CCC		High water content organic material	Foodstuff sludge Sewage Coffee grounds Tofu refuse, kitchen garbage, etc.	○	Continuous	Indirect
Features and conditions	Carbonization equipment for handling high water content organic material effective on sludge and fruit mash. Can also be used for continuous carbonization of lumber. Can be designed to match treatment capacity.
CCC-M		High water content organic material	Paper sludge Organic sludge, etc.	○	Continuous	Carbonization firing
Features and conditions	Carbonization equipment for handling high water content organic material, continued to follow-up with firing process as CCC series post-processing. Effective in recycling paper sludge.
GBC		General refuse	General refuse Waste plastic, etc.	×	Batch	Hot blast
Features and conditions	Dedicated carbonization equipment for general refuse. Features easy-to-use top-loading system with continuous bottom discharge by screw. Large types must be fitted with forced cooling system.
TBC		Specially designed for tires and RDF	Tires, RDF, etc.	×	Batch	Hot blast
Features and conditions	Dedicated equipment for tires and RDF. Features easy-to-use top-loading system; tires can be loaded as they are. Wire separated after carbonization.
FCS		BSE specific locations	BSE specific locations	×	Batch	Dry firing
Features and conditions	Incinerator for BSE specific locations. Conducts smooth thermal decomposition completely through bones with firing after carbonization. Complete firing with no carbon remaining. Volume reduction ratio of 80% or greater is possible.
LBC		Experimental use	General organic material	△	Batch	Indirect by electrical heater
Features and conditions	Ideal for small-volume experimental carbonization, enabling stable carbonization up to 1,000℃. Can be installed indoors and is temperature adjustable in stages of several ℃. Ideal for producing comparatively experimental materials.